DIY How to Replace the Water Filter and Reset Alarm on Samsung Refrigerator

DIY How to Replace the Water Filter and Reset Alarm on Samsung Refrigerator. Samsung Refrigerator Troubleshooting Replacing Water Filter small xvid

DIY How to Replace the Water Filter and Reset Alarm on Samsung Refrigerator video duration 3 Minute(s) 42 Second(s), published by DIY & RVing with Javi on 09 07 2018 - 00:35:43.

Installation Instructions below: 1
Soak new Filter in water for 15 minutes prior to installing it in your refrigerator to remove air from the carbon block
2 Easily replace your Samsung DA29-00020B .

Hi everyone!! Thanks for watching, this is just a quick video how to change the water filter on a Samsung fridge
please hit the thumbs up if this video was helpful This is my leaking water dispenser on my Samsung Refrigerator model number RF4287HARS
It has always leaked since the first day of ownership
Samsung

Installation Instructions below:
1. Soak new Filter in water for 15 minutes prior to installing it in your refrigerator to remove air from the carbon block.
2. Grab Paper Towels or a towel, place in fridge under filter knob.
3. Twist the old filter counter-clockwise to unlock (lefty loosey)
4. Pull old filter straight out and discard.
5. Grab new pre soaked filter, water will still be in new filter, will be caught with towel in fridge if it spills out.
6. Insert new filter twist clockwise until locked (righty tighty)
7. Wipe away water that came out
8. Purge system by running two to three gallons of water through your refrigerator’s water dispenser to remove air and loose carbon pieces. The refrigerators water may be cloudy and may sputter until the air is removed.
9. Open fridge door and check for any possible leaks.
10. Reset your “change filter” indicator by pressing the Alarm/Filter Reset button by holding is down for 3 seconds. The water filter indicator should turn off.

If you wish to just turn the Filter Alarm Off simply hold the Alarm Filter Reset button for 3 seconds and it should turn off.